|
RA1 Datasheet, PDF (1/12 Pages) Japan Aviation Electronics Industry, Ltd. – Connector “A” for IMT-2000 Mobile Phones | |||
|
COMPONENTS PRODUCT INFORMATION
NEW
Connector âAâ for IMT-2000 Mobile Phones
RA1 Series
CONNECTOR
MB-0052-6
July 2006
RoHSãCompliant
Outline
(RA1P011FP3)
(RA1R011HA1)
The RA1 Series is an integrated connector incorporating signal contacts and a coaxial
contact compliant with the requirements for connector âAâ for IMT-2000 mobile phones.
Connector âAâ was standardized for the IMT-2000 interface by the EIAJ.
Features
ÂCompliant with EIAJ RC-5238 Connector âAâ for IMT-2000 mobile phones. (Integrated
connector with 10 signal contacts and 1 coaxial contact.)
ÂSmaller and lighter than the DH Series, connector for digital mobile phones.
(0.5mm signal contact pitch, volume ratio is 1/3 for receptacle, 1/2 for plug (compared to
the JAE products.))
ÂStatic electricity countermeasure and EMI shield provided by a metal shell for signal
transmission connector.
ÂBoth receptacle and plug use full-cover shells for the mating area, and a mechanism to
prevent opening of the shells.
ÂCompatible with live insertion/ removal (sequence) by providing contacts of different
length in receptacle.
ÂSignal contacts are compatible with high-speed transmission. (Compatible with USB 1.1)
ÂCoaxial contact in receptacle compatible with operating frequency up to 2.2GHz.
ÂEmbossed tape supply ensuring 6mm x 6mm adhesion area for receptacle is available.
General Specifications
ÂNo. of contacts:11 (including1 coaxial.)
ÂRated current: Less than DC 0.5A
ÂRated voltage: AC 30Vr.m.s.
(1.0A for 5 terminals max. ---Note)
ÂContact resistance: Initial 50m ohm max.
ÂWithstand voltage:
ÂInsulation resistance: 1000M ohm min.
Signal contacts: AC 300Vr.m.s.
Coaxial contacts AC 100Vr.m.s.
Signal contacts: AC 300Vr.m.s. per minute
Coaxial contacts: AC 100Vr.m.s. per minute
ÂElectrostatic capacity: 2pF max.
ÂVSWR: Less than 1.5 (Up to 2.2GHz)
ÂInsertion loss: 0.5dB max. (Up to 2.2GHz)
ÂOperating temperature & humidity:
ÂLife time: 10,000 times
ÂApplicable cable:
Up to AWG #28 for signal contacts
Equivalent to 1.5D for coaxial contact
-25 to +70 Deg. C , 85% max.
(Note) â5 terminalsâ indicates terminals 1, 4, 5, 6, and 10
JAE PMK Div. Proprietary. Copyright ©ã2006ï¼Japan Aviation Electronics Industry, Ltd.
1/12
|
▷ |