JF04 Datasheet, PDF (1/5 Pages) Japan Aviation Electronics Industry, Ltd. – FFC Harness for High Speed Transmission

COMPONENTS PRODUCT INFORMATION
NEW
FFC Harness for High Speed Transmission
JF04 Series
CONNECTOR
MB-0163-1
November 2006
RoHS　Compliant
<<Outline>>
High speed serial transmission such as LVDS, TMDS(HDMI), PCI express are
beginning to be widely used, not only in the personal computer market but also in
various markets such as TV, consumer device, PPC and medical device markets. At
the same time in the expanding markets including LCD TV, there are strong demands
for reasonably priced high speed transmission cables.
JF04 is the connector harness just to answer those demands.
Features
•Can be mated with FI-R and FIX connectors
•1m min. transmission of serial signal of LVDS, TMDS etc. is possible
•Matches with 100ohm differential characteristic impedance.
Ground of the cable area is reinforced by the ground layer.
•Features of the connector mating area is in common with FI-X, FI-R
General Specification
FI-R Type
JF04R0R0**
•No. of Contacts: 21, 31, 41, 51 pos.
•Contact resistance: 40m ohm max.
•Dielectric withstanding voltage:
AC250 Vr.m.s per minute
•Operating temperature:
-40 Deg. C to +80 Deg. C
•Rated current: AC, DC each 0.3A/ terminal
•Insulation resistance: 100M ohm min.
•Pitch: 0.5mm
•Impedance: Connector; 100ohm ± 15%
FFC; 100ohm ±10%
1/5
JAE PMK Div. Proprietary. Copyright © 2006，Japan Aviation Electronics Industry, Ltd.