|
HJ1 Datasheet, PDF (1/9 Pages) Japan Aviation Electronics Industry, Ltd. – High-speed Differential Transmission Compatible Board-to-Cable Connector | |||
|
COMPONENTS PRODUCT INFORMATION
NEW
High-speed Differential Transmission Compatible
Board-to-Cable Connector
HJ1 Series
CONNECTOR
MB-0272-1
November 2013
Plug
RoHS Compliant
Receptacle
Pull bar without lock
Pull bar with lock
The HJ1 Series board-to-cable horizontal connector compatible with eDP ver.1.4(5.4Gbps)
high-speed transmission has been developed as a LCD interface for next generation
notebook PCs and tablet PCs.
Features
ï®0.4mm pitch, 0.9mm mating height (maximum 1.0mm) narrow pitch, low-profile
board-to-cable connector.
ï®Discrete cable is compatible with 34AWG (rated current 1A per position).
ï®Compatible with eDP1.4 (5.4 Gbps) high-speed transmission.
ï®High shielding is realized with multiple grounding points.
ï®Can use both coax and discrete wires together.
ï®Pb-free and Halogen-free.
Development Status
ï® No. of Contacts: 50 positions
ï® Pitch: 0.4mm
ï® Applicable Wire:
34AWG to 36AWG (discrete wire)
36AWG to 44AWG (fine wire coaxial)
ï® Rated Current:
AC, DC each 1A per terminal (34AWG)
ï® Rated Voltage:
AC, DC each 100V per terminal
ï® Insulation Resistance:
1000M ohms min.
ï® Dielectric Withstanding Voltage:
AC250Vr.m.s. for 1 minute
ï® Contact Resistance: 70m ohms max.
ï® Operating Temperature:
-40 Deg. C + 85 Deg. C
JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd.
1/9
|
▷ |