DP1 Datasheet, PDF (1/12 Pages) Copal Electronics – Directing Switches

COMPONENTS PRODUCT INFORMATION
NEW
DisplayPort^TM Standard Digital Interface Connector
DP1 Series
CONNECTOR
MB-0192-1
October 2008
RoHS Compliant
The DP1 Series is a high speed differential transmission board-to-cable connector
compatible with the Display Port v1.1a, the VESA standardized next-generation digital
display interface.
*VESA (Video Electronics Standard Association)
Features
„Receptacle is available in reverse SMT type for reverse mounting, angle SMT with
flange, standard angle SMT(mating height 6.5mm, thickest area 6.65mm), and angle
through-hole types (soldered terminal area 1.9mm, applicable board thickness t1.6).
„Reinforced-type receptacle available with enhanced metal shell structure, robust
against rough handling of cable during mating and unmating (DP1RD20JQ4).
„Excellent transmission with three-row footprint for through-hole type receptacle.
„Plugs are available as part of cables in 12.2mm height with latch (mechanical lock) for
increased retention, and 10mm height slim type without latch.
„Cable assembly passed compliance test certification by VESA. (2m, 32 AWG)
„Nickel and tin plating available for receptacle shell. With 0.3um min. gold plating for
contact.
Applicable Markets
Desktop PC, notebook PC, LCD monitor, graphic board, LCD projector,
LCD television, PDP, etc.
General Specifications
„No. of Contacts: 20 pos.
„Contact Resistance:
Contact area --- 50m ohm max.
Shell area --- 30m ohm max.
„Dielectric Withstanding Voltage :
AC 500V rms per minute
„Rated Current: 0.5A per contact
„Insulation Resistance: 100M ohm min.
(after test)
„Mating Cycles: 10,000 times
„Operating Temperature:
-20 Deg. C to +85 Deg. C
JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd.
1/12