CB1 Datasheet, PDF (1/3 Pages) Japan Aviation Electronics Industry, Ltd. – IEC60169-29(Type 0.1/2.3) Standard Compatible Coaxial Connector

COMPONENTS PRODUCT INFORMATION
NEW
IEC60169-29(Type 0.1/2.3) Standard Compatible Coaxial Connector ^CONNECTOR
CB1 Series
MB-0132-3
November 2006
RoHS　
Compliant
Board side receptacle
Cable side plug (mass production under study)
The CB1 series are compact coaxial connectors compatible to IEC60169-29(type 1.0/2.3)
standard for wireless communication devices and various radio frequency wave devices such
as mobile phones, PHSs, wireless LAN base stations, access points, etc. CB1 series are
space saving and are suitable for multiple use on devices as an I/O connector.
Existing Lineup
Receptacle(board side): Angle Bulk type(75 ohm type)
Mass production under study
Receptacle(board side): Angle type (75, 50 ohm type), Multiple pos. (multiple pin) type
Plug(cable side): Straight type, Angle type
Plug side mating style: Screw type, Snap on push pull type
**Items and cables that are not in the above are under consideration. Please contact us. **
Features
„Compact coaxial connector compatible to IEC60169-29(Type 0.1/2.3) standard
„Receptacle side angel type suitable for narrow-pitch multiple mounting because of small
size --7mm x 7mm for occupied PCB dimension and 4.1mm dia. outer dimension at mating
portion
„Low profile receptacle, 7.2mm height from PCB
„Screw lock mating is possible and the size is equivalent to Type SMB(IEC60169-10)
„Floating in axial direction with approximately 3mm mating stroke (effective length)
„Three types of lock mechanism is standardized for cable side, which are intermatable
with this receptacle.
-Screw type: outer diameter 6.5 mm max. extremely compact as a screw type
-Snap-on, Push-Pull type: compatible to friction lock and complete lock
- Slide in type: compatible to rack and panel type mating (without lock)
„50 ohm and 75 ohm are standardized. Applicable frequency are as below
　　50 ohm: DC to 10GHz, 75 ohm: DC to 2GHz
„High environmental durability with surface finishes in gold plating
„Compliant to RoHS directive
Applications
Mobile phone base stations, PHS base stations, wireless LAN Access points, wireless
communication devices, broadcasting devices, measuring devices, RFID(IC tag,
automatic recognition) high frequency module, wireless power amplifiers, etc.
JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd.
1/3