IAB110P_12 Datasheet, PDF (8/8 Pages) IXYS Corporation – Integrated Telecom Circuits

INTEGRATED CIRCUITS DIVISION
IAB110P
IAB110P
PIN 16
PIN 1
10.160±0.381
(0.400±0.015)
MECHANICAL DIMENSIONS
10.363±0.127
(0.408±0.005)
7.493±0.127
(0.295±0.005)
0.635 X 45°
(0.025 X 45°)
0.254 ±0.0127
(0.010±0.0005)
PCB Land Pattern
1.016 TYP
(0.040 TYP)
1.90
(0.075)
9.30
(0.366)
1.270 TYP
(0.050 TYP)
0.406 TYP
(0.016 TYP)
8.890 TYP
(0.350 TYP)
0.508±0.1016
(0.020±0.004)
2.108 MAX
(0.083 MAX)
See Note 3
Lead to Package Standoff:
MIN: 0.0254 (0.001)
MAX: 0.102 (0.004)
1.27
(0.050)
0.60
(0.024)
DIMENSIONS
mm
(inches)
NOTES:
1. Coplanarity = 0.1016 (0.004) max.
2. Leadframe thickness does not include solder plating
(1000 microinch maximum).
3. Sum of package height, standoff, and coplanarity
does not exceed 2.108 (0.083).
IAB110PTR Tape & Reel
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
Embossed Carrier
Embossment
B₀=10.70
(0.421)
K₀=3.20
(0.126)
K₁=2.70
(0.106)
A₀=10.90
(0.429)
P=12.00
(0.472)
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions
listed on page 5 of EIA-481-2
W=16
(0.630)
Dimensions
mm
(inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-IAB110P-R04
©_{Copyright 2012, IXYS Integrated Circuits Division}
All rights reserved. Printed in USA.
8
12/19/2012