SLMD960H12 Datasheet, PDF (5/6 Pages) IXYS Corporation – IXOLAR High Efficiency SolarMD.

SolarMD Description
SolarMD is made of monocrystalline, high-efficiency solar cells in a surface mountable package.
They’re robust and can be used in harsh environments. Solar cells used in SolarMD have a very
high (22%) power conversion efficiency, which means that 22% of the light energy is converted
into electrical energy. They’re extremely useful in applications requiring solar power generation in
a limited space.
Monocrystalline cells can be used in indoor and outdoor applications because they have a wide
spectral sensitivity, 300 to 1100 nm. However, the output power of a solar cell is proportional
(over a wide range) to the incoming light energy, and irradiance is generally much higher
outdoors. The values in the data sheet are measured at “standard condition” of 1 sun, which is
equal to 1000W per square meter sunlight irradiance at a defined light spectrum (air mass of 1.5)
and 25°C cell temperature.
IXYS reserves the right to change limits, test conditions and dimensions
IXYS KOREA LTD.
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do (Korea)
Phone [phone], Fax [phone]
5
Rev.Jan. 2011
© 2010 IXYS All rights reserved
IXYS Corporation
1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone [phone], Fax [phone]