CPC7581 Datasheet, PDF (4/15 Pages) Clare, Inc. – Line Card Access Switch

INTEGRATED CIRCUITS DIVISION
1.3 Absolute Maximum Ratings
Parameter
Minimum Maximum Unit
+5 V power supply (V_DD)
-0.3
7
V
Battery Supply
-
-85
V
D_GND to F_GND Separation
-5
+5
V
Logic input voltage
-0.3 V_DD + 0.3 V
Logic input to switch output
isolation
-
320
V
Switch open-contact
isolation (SW1, SW2, SW3)
-
320
V
Switch open-contact
isolation (SW4)
-
465
V
Operating relative humidity
5
95
%
Operating temperature
-40
+110
C
Storage temperature
-40
+150
C
Absolute maximum electrical ratings are at 25°C.
Absolute maximum ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at these or
any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings for
an extended period may degrade the device and affect its
reliability.
CPC7581
1.4 ESD Rating
ESD Rating (Human Body Model)
1000 V
1.5 General Conditions
Unless otherwise specified, minimum and maximum
values are production testing requirements.
Typical values are characteristic of the device at 25°C
and are the result of engineering evaluations. They are
provided for informational purposes only and are not
part of the manufacturing testing requirements.
Specifications cover the operating temperature range
T_A = -40°C to +85°C. Also, unless otherwise specified
all testing is performed with V_DD = +5V_dc, logic low
input voltage is 0V_dc and logic high input voltage is
+5V_dc.
4
www.ixysic.com
R06