SLMD481H10 Datasheet, PDF (3/6 Pages) IXYS Corporation – IXOLAR High Efficiency SolarMD.

Package front-side and back-side view. (dimensions in millimeters)
Front-side View
Cell Size
Front-side View details
Back-side View details
Moisture Sensitivity, Reflow Soldering and Washing Information
IXYS has characterized the moisture reflow sensitivity of the SolarMD using IPC/JEDEC standard J-STD-020. Moisture uptake from
atmospheric humidity occurs by diffusion. During the soldering process to the electrode, the combination of moisture uptake and high
temperature soldering may lead to moisture induced delamination and cracking of the component. To prevent this, this component
must be handled with the standard soldering process and conditions in accordance with IPC/JEDEC standard J-STD-020 per the
labeled moisture sensitivity level (MSL), level 1. SLMD481H10 is encapsulated by the lamination with EVA and polymer film and thus
excessively high temperatures soldering reflow is prohibited. IXYS does not recommend the use of chlorinated solvents for washing.
Surface Protection Film
Please be advised that SLMD module is normally covered with protection film by factory to prevent it from scratch or dirt during the
transportation, Therefore it is highly recommended to remove the protection film at the end of your work. Especially when SLMD
should go through the high temperature process or environment, the film should be removed in advance. If protection film is not
wanted, please consult the factory.
IXYS reserves the right to change limits, test conditions and dimensions
IXYS KOREA LTD.
3
906-5 Iui-dong, Yeongtong-Gu, Suwon, Gyeonggi-Do, Korea
Phone [phone], Fax [phone]
Rev. Feb. 2011
© 2010 IXYS All rights reserved
IXYS Corporation
1590 Buckeye Drive, Milpitas, CA 95035-7418
Phone [phone], Fax [phone]