TX02-4400 Datasheet, PDF (1/2 Pages) IXYS Corporation – Interface Transformer

Interface Transformer
TX02-4400
General Description
The TX-02-4400PI/JI is a dual winding interface transformer
designed to be used with the IXYS IXBD4410/IXBD4411chip set.
This ISOSMART chip set controls the gates of two Power
MOSFETs or IGBTs connected in a half-bridge (phase-leg)
configuration. This signal transformer transfers information
between the two chips with greater than 2500V (RMS) isolation.
The TX02-4400PI is available in the standard 8-pin DIP package
(TX02-4400PI) and the 8-pin DIP Gullwing package (TX02-
4400JI)
Preliminary Data Sheet
TX02-4400PI
Symbol
Test Conditions
N_P:N_S
L
P
L_s
C
S
V_ISOL
Primary to Secondary Turns Ratio
f = 100 kHz (Note 1)
f = 100 kHz (Note 1)
f = 100kHz; primary to secondary (Note 1)
Primary to secondary,
50/60 Hz, RMS, t = 1 minute
T_{OP, STG}
T_L
Weight
Operating and storage Temperature
1.6 mm (0.063 in) from case for 10 s
Notes: 1. Nominal value
Pin Configuration
1
N_1S
2
8
N_1P
7
Ratings
3:1
0.97
µH
0.1
µH
0.5
pF
2500
V
-55 ... +125
°C
300
°C
2
g
TX02-4400JI
Features
• 2500V (RMS) Isolation
• Low interwinding capacitance
• Economical 8-PIN DIP packages
• Molding epoxy meets UL 94V-O
flammability classification
• To be submitted for UL
recognition
3
N
2P
4
6
N
2S
5
IXYS Corporation
3540 Bassett St; Santa Clara, CA 95054
Tel: [phone]; Fax: [phone]
e-mail: [e-mail]
www.ixys.com
Copyright © IXYS CORPORATION 2003
IXYS Semiconductor GmbH
Edisonstrasse15 ; D-68623; Lampertheim
Tel: [phone]; Fax: [phone]
e-mail: [e-mail]
First Release
DS99016A(11/03)