PD2401X2 Datasheet, PDF (1/5 Pages) IXYS Corporation – PD2401 AC Solid State Relays

INTEGRATED CIRCUITS DIVISION
Parameter
AC Operating Voltage
Load Current
On-State Voltage Drop
(I_L=1A_rms)
Rating
240
1
1.2
Units
V_rms
A_rms
V_rms
Features
• Load Current up to 1A_rms
• Blocking Voltages up to 500V_P
• 3750V_rms Input to Output Isolation
• 5mA Sensitivity
• Zero-Crossing Detection
• DC Control, AC Output
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
• VDE compatible
• Machine Insertable, Wave Solderable
Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contactors
• Large Relays
• Solenoids
• Motors
• Heaters
PD2401
AC Solid State Relays
Description
The PD2401 is an AC Solid State Switch using optical
coupling with dual power SCR outputs to produce an
alternative to optocoupler and Triac circuits. The
PD2401 switches are robust enough to provide a
blocking voltage of up to 500V_P and max surge
current rating of 20A. In addition, tightly controlled
zero-cross circuitry ensures switching of AC loads
without the generation of transients. The input and
output circuits are optically coupled to provide
3750V_rms of isolation and noise immunity between
control and load circuits. As a result the PD2401
is well suited for industrial environments where
electromagnetic interference would disrupt the
operation of electromechanical relays.
Approvals
• UL Recognized Component: UL 508 File E69938
• CSA Certified Component: Certificate LR43639-8
Ordering Information
Part #
PD2401
Description
4-Pin (16-Pin Body) DIP Package (25/Tube)
Pin Configuration
1
- LED
16
+ LED
8
AC Load
ZC
10
AC Load
Pb
e3
DS-PD2401-R13
www.ixysic.com
1