LOC110 Datasheet, PDF (1/6 Pages) Clare, Inc. – Linear Optocouplers

INTEGRATED CIRCUITS DIVISION
LOC110
Single Linear Optocoupler
Parameter
LED Operating Range
K3, Transfer Gain
Isolation, Input to Output
Rating
2 - 10
0.668 - 1.179
3750
Units
mA
-
V_rms
Features
• 0.01% Servo Linearity
• THD -87dB Typical
• Wide Bandwidth (>200kHz)
• Couples Analog and Digital Signals
• High Gain Stability
• Low Input/Output Capacitance
• Low Power Consumption
• 8-Pin Flatpack or DIP Package (PCMCIA
Compatible)
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
Applications
• Modem Transformer Replacement With No
Insertion Loss
• Digital Telephone Isolation
• Power Supply Feedback Voltage/Current
• Medical Sensor Isolation
• Audio Signal Interfacing
• Isolation of Process Control Transducers
Description
The LOC110 Single Linear Optocoupler features an
infrared LED optically coupled with two photodiodes.
One feedback (input) photodiode is used to generate
a control signal that provides a servomechanism
to the LED drive current, thus compensating
for the LED's nonlinear time and temperature
characteristics. The other (output) photodiode
provides an output signal that is linear with respect
to the servo LED current. The product features
wide bandwidth, high input to output isolation, and
excellent servo linearity.
Approvals
• UL Recognized Component: File # E76270
• CSA Certified Component: Certificate # 1175739
• Certified to:
IEC 60950-1: 2005
EN 60950-1: 2006
TUV Certificate # B 09 07 49410 006
Ordering Information
Part Number
LOC110
LOC110P
LOC110PTR
LOC110S
LOC110STR
Description
8-Pin DIP (50/Tube)
8-Pin Flatpack (50/Tube)
8-Pin Flatpack (1000/Reel)
8-Pin Surface Mount (50/tube)
8-Pin Surface Mount (1000/Reel)
K3 Sorted Bins
Bin C = 0.668 - 0.732
Bin D = 0.733 - 0.805
Bin E = 0.806 - 0.886
Bin F = 0.887 - 0.974
Bin G = 0.975 - 1.072
Bin H = 1.073 - 1.179
Pb
DS-LOC110-R09
e3
• The LOC110 will be shipped using bins available at date of
order. Any bin (C - H) can be shipped. Each tube or reel will
contain one K3-sorted bin. Each device will be marked with the
designated bin.
Pin Configuration
1
- LED
2
+ LED
3
C1
4
A1
8
N/C
7
N/C
6
C2
5
A2
www.ixysic.com
1