LBA127L_12 Datasheet, PDF (1/8 Pages) IXYS Corporation – Dual Single-Pole, Combination OptoMOS Relay

INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Ratings
250
150
15
Units
V_P
mA_rms / mA_DC

Features
• Current Limited 1-Form-A Relay
• 3750V_rms Input/Output Isolation
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• High Reliability
• Arc-Free With No Snubbing Circuits
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Small 8-Pin Package
• Machine Insertable, Wave Solderable
• Surface Mount, Tape & Reel Version Available
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Pb
e3
LBA127L
Dual Single-Pole, Combination
OptoMOS^® Relay
Description
LBA127L comprises two independent solid state
relays (one current-limited, single-pole, normally
open (1-Form-A) relay and one single-pole, normally
closed (1-Form-B) relay), in an 8-pin package that
employs optically coupled MOSFET technology to
provide 3750V_rms of input to output isolation.
The optically coupled relay outputs, which use the
patented OptoMOS architecture, are controlled by a
highly efficient GaAIAs infrared LED.
LBA127L is designed to provide an ideal solution
where a complementary Form-A/Form-B relay pair is
required in a space-saving single package.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
Ordering Information
Part #
LBA127L
LBA127LS
LBA127LSTR
Description
8-Pin DIP (50/Tube)
8-Pin Surface Mount (50/Tube)
8-Pin Surface Mount (1,000/Reel)
Pin Configuration
1
+ Control - Normally Closed
2
– Control - Normally Closed
3
+ Control - Normally Open
4
– Control - Normally Open
8
7 ^{Normally Closed Pole}
6
Normally Open Pole
5
Switching Characteristics of
Normally Open
(Form A) Devices
Form-A
I_F
I_LOAD
90%
t_on
10%
t_off
Switching Characteristics of
Normally Closed
(Form B) Devices
Form-B
I_F
I_LOAD
10%
t_off
90%
t_on
DS-LBA127L-R08
www.ixysic.com
1