IXD_614SI Datasheet, PDF (1/12 Pages) IXYS Corporation – AEC Q100 Qualified

INTEGRATED CIRCUITS DIVISION
IXD_614SI
Automotive Grade
14-Ampere, Low-Side, Ultrafast MOSFET Drivers
Features
• AEC Q100 Qualified
• 14A Peak Source/Sink Drive Current
• Wide Operating Voltage Range: 4.5V to 35V
• AEC Q100 Grade 1 -40°C to +125°C Operating
Temperature Range
• Logic Input Withstands Negative Swing of up to 5V
• Matched Rise and Fall Times
• Low Propagation Delay Time
• Low, 10A Supply Current
• Low Output Impedance
Applications
• Automotive DC/DC Regulators
• Electronic Power Steering
• Electric Vehicle Power Train Drives
• Brushless DC Motors
Description
The IXD_614SI is an automotive grade, high-speed
gate driver that is qualified according to AEC Q100
standards. The IXD_614SI output can source and sink
14A of peak current, while producing rise and fall
times of less than 35ns. Both the output and input are
rated to 35V. The input is virtually immune to latch-up,
and proprietary circuitry eliminates cross conduction
and "shoot-through." The IXD_614SI has a Grade 1,
-40°C to +125°C ambient operating temperature
range.
The IXDD614SI is configured as a non-inverting driver
with an enable, the IXDN614SI is configured as a
non-inverting driver, and the IXDI614SI is configured
as an inverting driver. The AEC Q100 qualified
IXD_614SI is available in an 8-pin Power SOIC
package with an exposed metal back.
Ordering Information
Part Number
IXDD614SI
IXDD614SITR
IXDI614SI
IXDI614SITR
Logic
Configuration
IN
OUT
EN
IN
OUT
IXDN614SI
IXDN614SITR
IN
OUT
Package Type
8-Pin Power SOIC
with Exposed Metal Back
Packing
Method
Tube
Quantity
100
Tape & Reel
2000
Tube
100
Tape & Reel
2000
Tube
100
Tape & Reel
2000
DS-IXD_614SI-R01
www.ixysic.com
1