CPC1968 Datasheet, PDF (1/7 Pages) IXYS Corporation – 5A Load Current with 5C/W Heat Sink

INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
Blocking Voltage
Load Current, T_A=25°C:
With 5°C/W Heat Sink
No Heat Sink
On-Resistance
R_JC
Rating
500
5
2
0.35
0.3
Units
V_P
A_rms / A_DC

°C/W
Features
• 5A Load Current with 5°C/W Heat Sink
• Low 0.35 On-Resistance
• 500V_P Blocking Voltage
• 2500V_rms Input/Output Isolation
• Low Thermal Resistance (0.3 °C/W)
• Electrically Non-conductive Thermal Pad for
Heat Sink Applications
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Applications
• Industrial Controls / Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
• Aerospace/Defense
Approvals
• UL 508 Recognized Component: File E69938
Pin Configuration
CPC1968
ISOPLUS™-264 Power Relay
Description
The CPC1968 single-pole normally open (1-Form-A)
Solid State Power Relay is rated for up to 5A
continuous load current with a 5°C/W heat sink.
Optically coupled MOSFET technology enables the
CPC1968 to provide 2500V_rms of input to output
isolation. The output, constructed with efficient
MOSFET switches and photovoltaic die, uses IXYS
Integrated Circuits Division’s patented OptoMOS
architecture while the input, a highly efficient GaAlAs
infrared LED, provides the optically coupled control.
The combination of low on-resistance and high load
current handling capability makes this relay suitable
for a variety of high performance switching
applications.
The unique ISOPLUS-264 package pioneered by
IXYS enables Solid State Relays to achieve the
highest load current and power ratings. This package
features a unique IXYS process in which the silicon
chips are soft soldered onto the Direct Copper Bond
(DCB) substrate instead of the traditional copper
leadframe. The DCB ceramic, the same substrate
used in high power modules, not only provides
2500V_rms isolation but also very low thermal
resistance (0.3 °C/W).
Ordering Information
Part
CPC1968J
Description
ISOPLUS-264 Package (25 per tube)
Switching Characteristics
Form-A
e3
I_F
I_LOAD
90%
t_on
10%
t_off
DS-CPC1968-R01
www.ixysic.com
1