CPC1964B Datasheet, PDF (1/6 Pages) IXYS Corporation – Low EMI and RFI Generation

INTEGRATED CIRCUITS DIVISION
Parameter
AC Operating Voltage
Load Current
On-State Voltage Drop
Blocking Voltage
Rating
20 - 280
1.5
1.4
800
Units
V_rms
A_rms
V_P (at I_L = 1.5A_P)
V_P
Features
• Load Current up to 1.5A_rms
• 800V_P Blocking Voltage
• 5mA Sensitivity
• 5000V_rms Input to Output Isolation
• Off-State dV/dt: 1000V/s Minimum
• 12.5mm External Creepage Distance with
Appropriate Layout
• Zero-Cross Switching
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contactors
• Large Relays
• Solenoids
• Motors
• Heaters
• Meters
CPC1964B
AC Power Switch
Description
CPC1964B is an AC Solid State Switch utilizing
dual power SCR outputs. This device also includes
zero-cross turn-on circuitry and is specified with a
blocking voltage of 800V_P .
In addition, the tightly controlled zero-cross circuitry
ensures low noise switching of AC loads by minimizing
the generation of transients. The optically coupled
input and output circuits provide 5000V_rms of isolation
between the control and load circuits. As a result, the
CPC1964B is well suited for industrial environments
where electromagnetic interference would disrupt the
operation of plant facility communication and control
systems.
Approvals
• UL 508 Certified Component: File E69938
• CSA Industrial Control Switches Approval: Pending
Ordering Information
Part #
CPC1964B
Description
8-Pin Power SOIC (25/Tube)
Pin Configuration
AC Load
8
7
AC Load
6
5
ZC
1
2
N/C + LED
3
4
– LED N/C
DS-CPC1964B-R03
www.ixysic.com
1