N242 Datasheet, PDF (2/2 Pages) Baumer IVO GmbH & Co. KG – Memory Controllers

Part number
N 242. 1 1
2 AX01
Voltage supply
2 85...265 VAC
Outputs
1 With output
Interface
1 RS485
Connection diagram
22 21 20 19 18 17
654 321
Memory Controllers
Manual and automatic format alignment
Display LCD two lines, interface RS485
N 242
Description
N 242 memory controller intended for front panel instal-
lation serves as memory and operating unit. By RS485
network up to 100 format profiles with several position
values for maximum 32 spindles can be saved and recalled
for retransmission to the SPAs (spindle position displays)
respectively actuators (multiconDrive) upon pressing a but-
ton. The two-line SPA display indicates both actual value
and target. Similar to the SPA display, the controller is giving
information whether the spindles are “in position” or “not in
position”.
The keypad provides 10 figures and 8 function keys allow-
ing easy parameter input and recall. multiconDrive provides
an external start key for centralized release of positioning
cycles. Programmable parameters enable perfect adapta-
tion to the application.
Programmable parameters and functions:
– tolerance window, end position switch-off
– collective groups of 5 spindles each
– teach-in of target values
– spindle pitch and compensation
– measuring unit mm/inch
– multilingual
Dimensions
144
116.5
20
2-4
16.5
124
120
2
www.baumerivo.com