H400 Datasheet, PDF (2/4 Pages) Baumer IVO GmbH & Co. KG – Totalizers mechanic

Totalizers mechanic
Stroke, meter and revolution counters
Display 7-digits, reset by key
H 400, M 400, U 400, U 401
Technical data - mechanical design
H 400
Function
Display
Count mode
Drive shaft
Stroke
Stroke lever
Stroke frequency
Measuring range
M 400
Function
Display
Count mode
Drive shaft
Measuring speed
Measuring precision
Measuring range
U 400
Function
Display
Count mode
Drive shaft
Operating speed
Measuring range
U 401
Function
Display
Count mode
Drive shaft
Operating speed
Measuring range
Stroke counter
White numbers on black
Adding in a stroke direction to
be indicated. 1 stroke = 1 count
Both sides, ø7 mm
>38° to <60°
To be positioned on shaft at
will. Stroke lever relocates
automatically to start position.
≤500 strokes/min
9 999 999
Meter counter
White numbers on black
Decimal digits in red
Adding in a rotational direction
to be indicated, subtracting
in reverse direction.
2 revs. = 10 counts
Both sides, ø7 mm
<100 m/min (measuring wheel)
1 dm
999 999.9 m
Revolution counter
White numbers on black
Adding in a rotational direction
to be indicated, subtracting in
reverse direction or always
adding. 1 rev. = 1 count
Both sides, ø7 mm
≤1000 rpm
9 999 999
Revolution counter
White numbers on black
Adding in a rotational direction
to be indicated, subtracting in
reverse direction. 1 rev. = 1
count
Centered below, ø7 mm
≤1000 rpm
9 999 999
Direction of strokes and rotation
H 400, M 400, U 400
Away from user
Sense of rotation or
stroke direction I
U 401
Towards user
Sense of rotation or
stroke direction II
Sense of rotation I
Sense of rotation II
Accessories
Measuring wheels for M 400
MR512.07A Circumf. 50 cm, knurled aluminium
MR542.07D Circumf. 50 cm, smooth Hytrel TPE-E
MR552.07A Circumf. 50 cm, smooth Vulkollan PUR
MR562.07A Circumf. 50 cm, knopped rubber NBR Nitril
MR592.07D Circumf. 50 cm, grooved Hytrel TPE-E
2
www.baumerivo.com