GXP5W Datasheet, PDF (2/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - bus interfaces

Absolute encoders - bus interfaces
Shaft with clamping or synchro flange
Optical multiturn encoders 13 bit ST / 16 bit MT, CANopen
GXP5W - CANopen
Part number
GXP5W.
10
Interface
05 CANopen Lift DSP 417/
galvanically isolated
06 CANopen DSP 406 /
galvanically isolated
15 CANopen Lift DSP 417 not
galvanically isolated
16 CANopen DSP 406 not
galvanically isolated
E-connection
A3 Connector M23, 12-pin, radial
D3 Connector D-SUB, 9-pin, radial
M1 Connector M12, 5-pin, radial
M2 2 x connector M12, 5-pin axial
M3 2 x connector M12, 5-pin radial
Voltage supply
10 10...30 VDC
Flange / Shaft
0 Clamping flange / ø10 mm IP 54
A Clamping flange / ø10 mm IP 65
1 Synchro flange / ø6 mm IP 54
B Synchro flange / ø6 mm IP 65
Accessories
Connectors and cables (page %S)
Z 148.001 Female connector M23, 12-pin, less cable
Z 148.003 Female connector M23, 12-pin, 2 m cable
Z 148.005 Female connector M23, 12-pin, 5 m cable
Z 148.007 Female connector M23, 12-pin, 10 m cable
Z 180.003 Female connector M12, 5-pin, 2 m cable
Z 180.005 Female connector M12, 5-pin, 5 m cable
Z 180.007 Female connector M12, 5-pin, 10 m cable
Z 181.005 Cable connector M12, 5-pin, 5 m cable
Connection M2 / M3, continuative bus
Mounting accessories (page %S)
Z 119.006 Eccentric fixing, single
Z 119.013 Adaptor plate for clamping flange for
modification into synchro flange
Z 119.015 Mounting adaptor for synchro flange
Z 119.017 Mounting angle for clamping flange
Z 119.035 Bearing flange for encoders with synchro
flange
2
www.baumerivo.com