GXP2W Datasheet, PDF (2/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - SSI

Absolute encoders - SSI
Shaft with clamping or synchro flange
Optical multiturn encoder 13 bit ST / 12 bit MT
Part number
GXP2W.
40
A2
E-connection
B0 M23 connector, 16-pin axial
B1 M23 connector, 16-pin radial
11 Cable 1 m, axial
21 Cable 1 m, radial
Flange / Shaft
0 Clamping flange / ø10 mm IP 54
A Clamping flange / ø10 mm IP 65
1 Synchro flange / ø6 mm IP 54
B Synchro flange / ø6 mm IP 65
Data transfer
T=1/f
clock
data _tv bit n bit n-1
tp
tm
bit 3 bit 2 bit 1
Clock frequency f
Scan ratio of T
Time lag tv
Monoflop time tm
Clock interval tp
62.5...1500 kHz
40...60 %
150 ns
20 µs
200 µs
GXP2W - SSI
Accessories
Connectors and cables (page %S)
Z 131.001 Mating connector M23, 16-pin, less cable
Z 131.003 Mating connector M23, 16-pin, 2 m cable
Z 131.005 Mating connector M23, 16-pin, 5 m cable
Z 131.007 Mating connector M23, 16-pin, 10 m cable
Mounting accessories (page %S)
Z 119.006 Eccentric fixing, single
Z 119.013 Adaptor plate for clamping flange for
modification into synchro flange
Z 119.015 Mounting adaptor for synchro flange
Z 119.017 Mounting angle for clamping flange
Z 119.025 Adaptor plate for clamping flange, mounting
by eccentric fixings (order separately)
Z 119.035 Bearing flange for encoders with synchro
flange
Programming accessories (page %S)
Z 139.004 Programming cable for SSI encoders,
CD with ProGeber software and manual
Z 150.008 CD with software ProGeber & manual
2
www.baumerivo.com