GCM2W Datasheet, PDF (2/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - SSI

Absolute encoders - SSI
Shaft with clamping or synchro flange
Magnetic multiturn encoder 12 bit ST / 12 bit MT
Part number
GCM2W.
01
E-connection
A0 Connector M23, 12-pin, axial
A1 Connector M23, 12-pin, radial
Voltage supply / signals
10 10...30 VDC / gray code 22 bit
12 10...30 VDC / binary code 22 bit
20 10...30 VDC / gray code 24 bit
22 10...30 VDC / binary code 24 bit
Flange / Shaft
0 Clamping flange / ø10 mm IP 54
A Clamping flange / ø10 mm IP 65
1 Synchro flange / ø6 mm IP 54
B Synchro flange / ø6 mm IP 65
Data transfer
T=1/f
clock
data
tv
bit n
bit n-1
tp
tm
bit 3 bit 2 bit 1
Clock frequency f
Scan ratio of T
Time lag tv
Monoflop time tm
Clock interval tp
62.5...1000 kHz
40...60 %
150 ns
20 µs + T/2
25 µs
GCM2W - SSI
Accessories
Connectors and cables (page %S)
Z 130.001 Female connector M23, 12-pin, less cable
Z 130.003 Female connector M23, 12-pin, 2 m cable
Z 130.005 Female connector M23, 12-pin, 5 m cable
Z 130.007 Female connector M23, 12-pin, 10 m cable
Mounting accessories (page %S)
Z 119.006 Eccentric fixing, single
Z 119.013 Adaptor plate for clamping flange for
modification into synchro flange
Z 119.015 Mounting adaptor for synchro flange
Z 119.017 Mounting angle for clamping flange
Z 119.035 Bearing flange for encoders with synchro
flange
2
www.baumerivo.com