G1MMH Datasheet, PDF (2/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - modular bus covers

Absolute encoders - modular bus covers
Optical sensing, hollow shaft up to ø50.8 mm
Multiturn encoder 13 bit ST / 16 bit MT
CANopen / DeviceNet / Profibus
G1MMH, G2MMH - multivo
Part number
Hollow shaft max. ø25.4 mm
G1MMH.
20
Hollow shaft max. ø50.8 mm
G2MMH.
20
3P32
5P32
8P22
Interface
Profibus-DPV0 / cable gland
CANopen / cable gland
DeviceNet / cable gland
Hollow shaft
2 Hollow shaft ø25.4 mm with pin 15 mm
3 Hollow shaft ø20 mm with pin 15 mm
3P32
5P32
8P22
Interface
Profibus-DPV0 / cable gland
CANopen / cable gland
DeviceNet / cable gland
Hollow shaft
2 Hollow shaft ø50.8 mm with pin 15 mm
3 Hollow shaft ø50 mm with pin 15 mm
CD with file descriptions is not included in the delivery.
You may order them on CD as accessory free-of-charge
under part number Z 150.022.
Matching bus covers are listed in the chapter “Accessories”.
Accessories
Mounting accessories for G1MMH (page %S)
Z 119.037 Rubber buffer element 18.5 mm long, as
torque support
Z 119.039 Set of adjusting angles as torque support
Z 119.040 Shoulder screw M5 as torque support
Z 119.041 Torque support by rubber buffer element for
encoders with 15 mm pin
Z 119.043 Spring coupling for GX and G1
Z 119.050 Spring coupling
Z 119.053 Spring coupling height 19.1 mm
Z 119.070 Spring coupling height 29.1 mm
Z 119.076 Spring coupling for encoders with ø58 mm
housing
Mounting accessories for G2MMH (page %S)
Z 119.037 Rubber buffer element 18.5 mm long, as
torque support
Z 119.039 Set of adjusting angles as torque support
Z 119.040 Shoulder screw M5 as torque support
Z 119.041 Torque support by rubber buffer element for
encoders with 15 mm pin
Z 119.050 Spring coupling
Z 119.053 Spring coupling height 19.1 mm
Z 119.070 Spring coupling height 29.1 mm
Z 119.076 Spring coupling for encoders with ø58 mm
housing
Programming accessories (page %S)
Z 150.022 CD with describing files & manuals
2
www.baumerivo.com