F102 Datasheet, PDF (2/4 Pages) Baumer IVO GmbH & Co. KG – Totalizers electromechanic

Totalizers electromechanic
Small impulse counters, adding
Display 4- or 6-digits, with/without reset button
F 102, F 112, F 122
Technical data - mechanical design
Display
Number of digits
Digit height
Count mode
Step-by-step switching
Measuring range
Reset
Operating temperature
Storing temperature
Relative humidity
Protection DIN EN 60529
Housing type
E-connection
Cutout dimensions
Weight approx.
Material
White numbers on black
4-digits with reset button
6-digits without reset button
4 mm
1 impulse = 1 count
Adding in 2 half steps
9999 and 999 999
Manual by reset button
0...+60 °C
-20...+70 °C
80 % non-condensing
IP 41
Built-in housing
Pin connector D = 1.5 mm
33 x 22 mm
75 g
Housing: Hostaform POM, black
F 102
Mounting
Dimensions W x H x L
Installation depth
Rear center screw mount
32 x 21.5 x 59 mm
74 mm
F 112
Mounting
Dimensions W x H x L
Installation depth
Front panel with 2 screws
39 x 37 x 59 mm
72 mm
F 122
Mounting
Dimensions W x H x L
Installation depth
Front panel with spring clips
37 x 25 x 59 mm
72 mm
Connection diagram
2
-(+)
Voltage
1
+(-)
Encoder
Trigger level
Max. counting speed 6 pulses/s
Voltage
230 VAC +6/-10 %
Power
5.5 VA
Min. pulse duration
50 ms
Min. pulse interval
120 ms
Switch on time (at 25 °C) 30 % max. 7 min
Max. counting speed 10 pulses/s
Voltage
24/110 VAC ±10 %
Power
3 VA
Min. pulse duration
50 ms
Min. pulse interval
50 ms
Switch on time (at 25 °C) 100 %
Max. counting speed 20 pulses/s
Voltage
24 VDC ±10 %
Power
2.3 W
Min. pulse duration
25 ms
Min. pulse interval
25 ms
Switch on time (at 25 °C) 100 %
2
www.baumerivo.com