Z139005 Datasheet, PDF (1/1 Pages) Baumer IVO GmbH & Co. KG – Accessories & Service

Accessories & Service
Programming accessories
Programming accessories
Dimensions
Part number
Z 139.005
Programming cable for parallel shaft
encoders, CD with ProGeber software and
manual
Terminal assignment
Encoder Mating connector Core
function M12, 5-pins
colour
PC connector
D-SUB, 9-pins
–
Pin 1
brown –
RxD
Pin 2
white Pin 3
GND
Pin 3
blue
Pin 5
P/R Mode Pin 4
black Pin 5
TxD
Pin 5
grey
Pin 2
Jumper 4-6 and
Jumper 7-8
Connect encoder to voltage supply (UB/red/pin 36 and
GND/blue/pin 37) using the supplementary 37-pin D-SUB
connector.
1
www.baumerivo.com