PCD45 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Process displays electronic

Process displays electronic
Analogue inputs and outputs for measured values
Large 14 mm display LED, 6-digits, programmable
PCD45
Features
–– Process display
–– Display 6-digits
–– Connection: Two one-channel analogue sensors
–– Two limits
–– Ratio display
–– Three analgue outputs
–– Programmable peak value memory (slave pointer)
–– Interface RS232 or RS422/RS485
PCD45 - Process display
Technical data - electrical ratings
Voltage supply
Power consumption
Sensor supply
Display
Number of digits
Digit height
Function
Measuring principle
Input logic
Control inputs
Control functions
Data memory
Analogue input
Analogue output
Outputs relay
Interfaces
Standard
DIN EN 61010‑1
Emitted interference
Interference immunity
85...265 VAC (50/60 Hz)
18...30 VDC
7 VA, 5 W
18 VDC ±10 % / 350 mA
LED, 7-segment display
6-digits
14 mm
Digital display of 2 analogue
measured values
Peak value memory (slave
pointer)
Analogue resolution 12 bit
PNP
3 outputs
Hold, Reset, Keylock, etc.
>10 years in EEPROM
0(2)...10 V, 0(4)...20 mA
Resolution 12 bit
Temp. coeffic. typ. ±20 ppm/°C
3 analogue outputs
0...+10 V, -10...+10 V
Resolution 12 bit
Temp. coeffic. typ. ±20 ppm/°C
Potential-free change-over
contact
RS232, RS422, RS485
Protection class II
Overvoltage category II
Pollution degree 2
DIN EN 61000-6-3
DIN EN 61000-6-2
Description
Two analog inputs for connection of two sensors. This
information can be indicated by F1 and F2. Both measured
values F1 and F2 are calculated internally and output by F3.
The measured values F1, F2 and F3 can be output as sepa-
rate analogue signals -10...+10 V / 0...+10 V for process
control. Two limits „P1“ and „P2“ that may be assigned at
will enable monitoring of production processes.
Technical data - electrical ratings
Programmable
parameters
Approvals
Analogue inputs and outputs
2 limits
Control inputs
Calculating functions
Offset (maximum and minimum
analogue limit)
UL/cUL, CE conform
Technical data - mechanical design
Operating temperature
Storing temperature
Relative humidity
Core cross-section
Protection DIN EN 60529
Operation / keypad
Housing type
Dimensions W x H x L
Cutout dimensions
Installation depth
Mounting
Weight approx.
Material
0...+50 °C
-20...+70 °C
80 % non-condensing
1.5 mm²
IP 65 face with seal
Membrane with softkeys
Housing for control panel
installation
96 x 48 x 124 mm
96 x 45 mm (+0.6)
123.75 mm
Front panel installation by clip
frame
350 g (AC), 250 g (DC)
Housing: Makrolon 6485 (PC)
1
www.baumerivo.com