PCD41 Datasheet, PDF (1/2 Pages) Baumer IVO GmbH & Co. KG – Process displays electronic

Process displays electronic
Analgoue measured value input, 2 limits
Large 14 mm display LED, 6-digits, programmable
PCD41
Features
–– Process display
–– Display 6-digits
–– Connection: One-channel analogue sensor
–– Two limits as relay output
–– With peak value memory
–– Interface RS232 or RS422/RS485
PCD41 - Process display
Technical data - electrical ratings
Voltage supply
Power consumption
Sensor supply
Display
Number of digits
Digit height
Function
Measuring principle
Input logic
Control inputs
Control functions
Data memory
Analogue input
Outputs relay
Interfaces
Standard
DIN EN 61010‑1
Emitted interference
Interference immunity
Programmable
parameters
Approvals
115/230 VAC ±10 % (50/60 Hz)
24/48 VAC ±10 % (50/60 Hz)
12...30 VDC
6 VA, 4 W
12...26 VDC / max. 80 mA
LED, 7-segment display
6-digits
14 mm
Digital display of 1 analogue
measured value
Analogue resolution 12 bit
PNP
2 Inputs
Hold, Reset, Keylock, etc.
>10 years in EEPROM
0(2)...10 V, 0(4)...20 mA
Resolution 12 bit
Temp. coeffic. typ. ±20 ppm/°C
Normally open or closed,
programmable
RS232, RS422, RS485
Protection class II
Overvoltage category II
Pollution degree 2
DIN EN 61000-6-3
DIN EN 61000-6-2
2 limits, analogue input
Control inputs
Calculating functions
Offset (maximum and minimum
analogue limit)
UL/cUL, CE conform
Description
PCD41 is a display for measured values which signals are
available as voltage or DC current. The operator is align-
ing the display by means of the front keypad. Two optional
limits “P1” and “P2” that can be assigned at will allow pro-
duction process control. Furthermore there is an electronic
peak value memory (slave pointer).
Technical data - mechanical design
Operating temperature
Storing temperature
Relative humidity
Core cross-section
Protection DIN EN 60529
Operation / keypad
Housing type
Dimensions W x H x L
Cutout dimensions
Installation depth
Mounting
Weight approx.
Material
0...+50 °C
-20...+70 °C
80 % non-condensing
1.5 mm²
IP 65 face with seal
Membrane with softkeys
Housing for control panel
installation
96 x 48 x 124 mm
94 x 45 mm (+0.6)
123.75 mm
Front panel installation by clip
frame
350 g (AC), 250 g (DC)
Housing: Makrolon 6485 (PC)
1
www.baumerivo.com