NE214 Datasheet, PDF (1/2 Pages) Baumer IVO GmbH & Co. KG – Preset counters electronic

Preset counters electronic
2 presets, serial interfaces
Large 14 mm display LED, 6-digits, programmable
NE214
Features
–– Preset counter with two presets
–– Display 6-digits
–– Batch counter, totalizer, hour counter
–– Operating mode, start count, scaling factor,
momentary signal time programmable
–– Connection: Incremental encoder or digital sensors
–– Batch counter with multiplier
–– Preset mode programmable
–– Interface RS232, RS422 or RS485
NE214 - LED Preset counter
Technical data - electrical ratings
Voltage supply
Power consumption
Sensor supply
Display
Number of digits
Digit height
Function
Scaling factor
Multitplier / batch counter
Count modes
Counting frequency
Operating modes
Data memory
Reset
Outputs electronic
Outputs relay
Output holding time
Analogue output
Interfaces
115/230 VAC ±10 % (50/60 Hz)
24/48 VAC ±10 % (50/60 Hz)
24 VDC ±10 %
7 VA, 5 W
12...26 VDC / max. 100 mA
LED, 7-segment display
6-digits
14 mm
Preset counter
Main counter with 2 presets
Batch counter with 1 preset
Totalizer
Hour counter
0.0001...9999.99
1...999
Adding or subtracting
A-B (difference counting)
A+B total (parallel counting)
Up/Down
A 90° B phase evaluation
3 Hz, 25 Hz, 10 kHz
programmable
Step preset, Main preset,
Parallel alignment, Trailing
preset
>10 years in EEPROM
Button, electric or automatic
Optocoupler
Potential-free change-over
contact
0.01...99.99 s
0(2)...10 V, 0(4)...20 mA
RS232, RS422, RS485
Technical data - electrical ratings
Standard
DIN EN 61010‑1
Emitted interference
Interference immunity
Programmable
parameters
Approvals
Protection class II
Overvoltage category II
Pollution degree 2
DIN EN 61000-6-3
DIN EN 61000-6-2
Operating modes
Sensor logic
Scaling factor
Count mode
Control inputs
UL/cUL, CE conform
Technical data - mechanical design
Operating temperature
Storing temperature
Relative humidity
E-connection
Core cross-section
Protection DIN EN 60529
Operation / keypad
Housing type
Dimensions W x H x L
Installation depth
Mounting
Cutout dimensions
Materials
Weight approx.
0...+50 °C
-20...+70 °C
80 % non-condensing
Plug-in screw terminals
1.5 mm²
IP 65 face with seal
Membrane with softkeys
Built-in housing
96 x 48 x 124 mm
124 mm
Clip frame
92 x 45 mm (+0.6)
Housing: Makrolon 6485 (PC)
Keypad: Polyester
350 g (AC), 250 g (DC)
1
www.baumerivo.com