ME282PTB Datasheet, PDF (1/2 Pages) Baumer IVO GmbH & Co. KG – Preset counters mechanic

Preset counters mechanic
Meter counters PTB approved, adding
Display 5 digits, manual reset by lever
ME282 PTB
Features
–– PTB Preset counter with one or two presets
–– Meter counter
–– Adding
–– Display 5-digits
–– Reset by lever
ME282 - PTB Meter counter
Technical data - electrical ratings
Preset
Preset setting
Limit switch
Precontact
Output contact
Switching voltage
Switching current
Switching capacity
Spark extinguisher
2 presets
Press reset button and hold.
Enter desired value in any
order. Release reset button.
Trigger at preset 1 (adding)
Trigger at preset 2
Change-over contact
230 VAC / VDC
2A
100 VA / 30 W
Recommended for inductive
load
Technical data - mechanical design
Function
PTB Meter counter with preset
Display
White numbers on black
Decimal digit with scale
Number of digits
5-digits
Digit height
7 mm
PTB approval
1.3 / 91.08
Count mode
Adding in a rotational direction
to be indicated, subtracting
in reverse direction.
2 revs. = 10 counts
Drive shaft
Both sides, ø7 mm
Reset
By reset lever to preset value.
Do not let snap lever or make
jerky movements.
Measuring speed
2 revs. = 10 di. = <250.0 m/min
Measuring precision
1 dm
Measuring range
9999.95 m
Operating temperature 0...+60 °C
Housing type
Surface mount housing
Housing colour
Grey
Dimensions W x H x L 120 x 105 x 95 mm
Dimensions mounting plate 158 x 105 mm
Mounting
Base plate, 4 mounting holes
Weight approx.
140 g
Material
Aluminium die cast alloy
E-connection
Terminal block connector
1
www.baumerivo.com