HS35F Datasheet, PDF (1/8 Pages) Baumer IVO GmbH & Co. KG – Insulated through hollow shaft 0.375...1 inch

Incremental encoders
Insulated through hollow shaft ø0.375...1 inch
1024…80000 pulses per revolution
HS35F
Features
–– Robust industrial encoder up to IP 67 protection
–– Shock resistant up to 200 g’s
–– Insulating insert to prevent high shaft currents from
damaging bearings
–– Wide range voltage supply 4.75...30 VDC
–– Precision ≤60 arc-seconds for perfect process control
–– Max. 80000 pulses per revolution
HS35F with insulated hollow shaft
Technical data - electrical ratings
Voltage supply
4.75...30 VDC
Reverse polarity protection Yes
Consumption w/o load
≤40 mA (24 VDC)
≤130 mA (4.75 VDC) + output
load, max. 250 mA
Pulses per revolution
1024...80000
Accuracy
≤60 arc-seconds
Sensing method
Optical
Output frequency
≤300 kHz (TTL)
≤160 kHz (HTL)
≤160 kHz (OC)
Output signals
A, B, Z
A, B, Z + complement,
½ cycle index gated with
negative B channel
Output stages
Linedriver (TTL, 7272)
Vout = 5 V, short-circuit proof
Push-pull (HTL, 7272)
Vout = Vin, short-circuit proof
Open Collector (OC, 7273)
Vout = Vin, short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-3
Approvals
UL approval / file no. E240061,
ROHS compliant EU guideline
2011/65/EC, CE
Technical data - mechanical design
Size (flange)
Shaft type
Bore runout
Admitted misalignment
Protection DIN EN 60529
Operating speed
Bearing
Starting torque
Rotor moment of inertia
Service life
Materials
Operating temperature
Relative humidity
Resistance
Connection
Weight approx.
ø3.15" (ø80 mm)
ø0.375...1" (ø9.525...25.4 mm)
(through hollow shaft isolated)
0.0016" (0.04 mm) TIR max.
0.004" (0.1016 mm) radial TIR
(end of shaft)
0.01" (0.254 mm) axial
IP 54, IP 65, IP 67
≤5000 rpm (see temperature
diagram)
52100 SAE high carbon steel
(ABEC 5)
≤3 in-oz (77 °F, IP 65)
≤0.02 Nm (+25 °C, IP 65)
2.3 oz-in² (420 gcm²)
Bearing: typ. 13 billion rev.
(89000 h/2500 rpm)
Housing: aluminium,
powder-coated
Shaft: stainless steel
-40...+212 °F (-40...+100 °C),
(fixed cable): see temperature
diagram
98 % non-condensing
DIN EN 60068-2-6
Vibration 20 g, 60-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
MIL-connector, 7-pin
MIL-connector, 10-pin
Cable (AWG26 wire)
23 oz., 660 g
1
www.baumer.com/motion