GXP6H Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - bus interfaces

Absolute encoders - bus interfaces
Hollow shaft ø14 mm
Multiturn encoder 13 bit ST / 12 bit MT, Interbus
GXP6H
GXP6H with hollow shaft
Technical data - electrical ratings
Voltage supply
10...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤60 mA (24 VDC)
Initializing time (typ.)
50 ms after power on
Interface
Interbus
Transmission rate
500 kBaud
Profile conformity
Encoder profile 71
Steps per turn
8192 / 13 bit
Number of turns
4096 / 12 bit
Absolute accuracy
±0.025°
Sensing method
Optical
Code
Gray or binary
Code sequence
CW default, programmable
Output circuit
RS485
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Programmable
parameters
Total resolution
Rotating direction and code
Preset and offset
Zero point setting
Approval
UL approval / E63076
Features
–– Encoder multiturn / Interbus
–– Optical sensing
–– Resolution: singleturn 13 bit, multiturn 12 bit
–– Hollow shaft ø14 mm
–– Interbus encoder profile 71
–– ENCOM profile K3
–– High reliability by self-diagnostics
–– Zero point, offset and turning direction programmable
–– Cost-efficient mounting
Optional
–– Transmission rate 2 MBaud
Technical data - mechanical design
Housing
Shaft
Protection DIN EN 60529
Operating speed
Rotor moment of inertia
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø75 mm
ø14 mm hollow shaft
IP 54
≤6000 rpm (mechanical)
≤6000 rpm (electric)
20 gcm²
Housing: steel
Flange: aluminium
-25...+85 °C
-40...+85 °C (optional)
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
430 g
Connector, 2 x 9-pin
1
www.baumerivo.com