GXA1W Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - parallel

Absolute encoders - parallel
Shaft with clamping or synchro flange
Singleturn encoder, capped gray code
GXA1W - parallel
Features
–– Encoder singleturn / parallel
–– Optical sensing
–– Clamping flange or synchro flange
–– Encoder with capped gray code
–– Short-circuit proof push-pull outputs
–– Output release by enable signal
GXA1W with clamping flange
Technical data - electrical ratings
Voltage supply
10...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤60 mA (24 VDC)
Initializing time (typ.)
20 ms after power on
Interface
12 parallel outputs
Steps per turn
2880
Absolute accuracy
±0.05°
Sensing method
Optical
Code
Gray excess
Code sequence
CW/CCW coded by connection
Inputs
UP/DOWN
ENABLE
STORE
Output circuit
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Approval
UL approval / E63076
Technical data - mechanical design
Housing
Shaft
Flange
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
ø10 mm (clamping flange)
ø6 mm (synchro flange)
Clamping or synchro flange
IP 54 without shaft seal
IP 65 with shaft seal
≤10000 rpm (mechanical)
≤6000 rpm (electric)
≤0.015 Nm IP 54
≤0.03 Nm IP 65
14.5 gcm²
≤20 N axial
≤40 N radial
Housing: aluminium
Flange: aluminium
-25...+85 °C
-40...+85 °C (optional)
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
250 g
Connector, 16-pin
1
www.baumerivo.com