GPI0W Datasheet, PDF (1/2 Pages) Baumer IVO GmbH & Co. KG – Incremental encoders

Incremental encoders
Shaft with clamping or synchro flange, PTB approved
Resolution 50 or 500 pulses
GPI0W
Features
–– Encoder with shaft ø10 mm or ø6 mm
–– PTB approved
–– Clamping flange or synchro flange
–– High rotation speed max.10000 rpm
–– Compact design
–– High resistance to shock and vibrations
GPI0W with clamping flange
Technical data - electrical ratings
Voltage supply
10...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤30 mA (24 VDC)
Resolution (steps/turn) 50...500
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤150 kHz
Output signals
A 90° B + N
Output circuit
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Approval
UL approval / E63076
Output signals
Clockwise rotating direction when looking at flange.
Track A
Track B
90°
Zero pulse
Technical data - mechanical design
Housing
Shaft
Flange
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
ø6 mm (synchro flange)
ø10 mm (clamping flange)
Clamping or synchro flange
IP 54
≤10000 rpm
≤0.015 Nm IP 54
14.5 gcm²
≤20 N axial
≤40 N radial
Housing: aluminium
Flange: aluminium
-25...+85 °C
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
250 g
Cable
1
www.baumerivo.com