GI355 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Incremental encoders

Incremental encoders
Shaft with clamping or synchro flange
Resolution 5...6000 pulses
GI355, GI356
GI355 with clamping flange
Technical data - electrical ratings
Voltage supply
5 VDC ±10 %
4.75...30 VDC
Reverse polarity protection Yes (4.75...30 VDC)
Consumption w/o load
≤30 mA (24 VDC)
≤60 mA (5 VDC)
Resolution (steps/turn) 5...6000
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤150 kHz
Output signals
A 90° B, N + inverted
Output circuit
Linedriver RS422
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Approval
UL approval / E63076
Features
–– Encoder with shaft ø10 mm or ø6 mm
–– Resolution max. 6000 ppr
–– Optical sensing
–– Clamping flange or synchro flange
–– Industrial standard
–– High rotation speed max.10000 rpm
–– Compact design
Optional
–– Stainless steel design GE355
–– ATEX-approved, see X 700
Technical data - mechanical design
Housing
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
IP 54 without shaft seal
IP 65 with shaft seal
≤10000 rpm
≤0.015 Nm IP 54
≤0.03 Nm IP 65
14.5 gcm²
≤20 N axial
≤40 N radial
Housing: aluminium
Flange: aluminium
-25...+100 °C (5 VDC)
-25...+85 °C (24 VDC)
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
250 g
Connector or cable
GI355
Shaft
Flange
ø10 mm
Clamping flange
GI356
Shaft
Flange
ø6 mm
Synchro flange
1
www.baumerivo.com