GI352 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Incremental encoders

Incremental encoders
Shaft and flange in inch dimensions
Resolution 5...6000 pulses
GI352
Features
–– Encoder with inch dimensions
–– Resolution max. 6000 ppr
–– Optical sensing
–– Shaft ø9.52 mm
–– Square flange 63.5 x 63.5 mm
–– MIL connector 7-pin and 10-pin
–– High rotation speed max.10000 rpm
–– High resistance to shock and vibrations
GI352 with square flange
Technical data - electrical ratings
Voltage supply
5 VDC ±10 %
4.75...30 VDC
Reverse polarity protection Yes (4.75...30 VDC)
Consumption w/o load
≤30 mA (24 VDC)
≤60 mA (5 VDC)
Resolution (steps/turn) 5...6000
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤150 kHz
Output signals
A 90° B, N + inverted
Output circuit
Linedriver RS422
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Approval
UL approval / E63076
Technical data - mechanical design
Housing
Shaft
Flange
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
ø9.52 mm
Clamping flange square
63.5 x 63.5 mm
IP 54 without shaft seal
IP 65 with shaft seal
≤10000 rpm
≤0.015 Nm IP 54
≤0.03 Nm IP 65
14.5 gcm²
≤20 N axial
≤40 N radial
Housing: aluminium
Flange: aluminium
-25...+100 °C (5 VDC)
-25...+85 °C (24 VDC)
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
280 g
Connector
1
www.baumerivo.com