GE355 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Incremental encoders

Incremental encoders
Stainless steel housing, shaft with clamping flange
Resolution 5...6000 pulses
GE355
Features
–– Encoder with clamping flange
–– Stainless steel design
–– Optical sensing
–– Resolution max. 6000 ppr
–– Clamping flange with shaft ø10 mm
GE355 with clamping flange
Technical data - electrical ratings
Voltage supply
5 VDC ±10 %
4.75...30 VDC
Reverse polarity protection Yes (4.75...30 VDC)
Consumption w/o load
≤30 mA (24 VDC)
≤60 mA (5 VDC)
Resolution (steps/turn) 5...6000
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤150 kHz
Output signals
A 90° B, N + inverted
Output circuit
Linedriver RS422
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Approval
UL approval / E63076
Technical data - mechanical design
Housing
Shaft
Flange
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
ø10 mm (clamping flange)
Clamping flange
IP 67
≤10000 rpm
≤0.03 Nm IP 67
14.5 gcm²
≤20 N axial
≤40 N radial
Housing: stainless steel 1.4305
Flange: stainless steel 1.4305
-25...+85 °C
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
500 g
Cable 1 m
1
www.baumerivo.com