GA240.010C002 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - parallel

Absolute encoders - parallel
Shaft with clamping or synchro flange
Optical singleturn encoder 13 bit, gray or binary
GA240, GA241 - parallel
Features
–– Encoder singleturn / parallel
–– Optical sensing
–– Resolution: 13 bit
–– Clamping flange or synchro flange
–– Short-circuit proof push-pull outputs
–– Output release by enable signal
–– Permanent check of code continuity
GA240 with clamping flange
Technical data - electrical ratings
Voltage supply
10...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤60 mA (24 VDC)
Initializing time (typ.)
20 ms after power on
Interface
13 parallel outputs
Steps per turn
8192 / 13 bit
Absolute accuracy
±0.025°
Sensing method
Optical
Code
Gray or binary
Code sequence
CW/CCW coded by connection
Inputs
Control signals UP/DOWN and
zero
STORE
ENABLE
Output circuit
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Diagnostic functions
Self-diagnosis
Code continuity check
Approval
UL approval / E63076
Technical data - mechanical design
Housing
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
IP 54 without shaft seal
IP 65 with shaft seal
≤10000 rpm (mechanical)
≤6000 rpm (electric)
≤0.015 Nm IP 54
≤0.03 Nm IP 65
14.5 gcm²
≤20 N axial
≤40 N radial
Housing: aluminium
Flange: aluminium
-25...+85 °C
-40...+85 °C (optional)
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
250 g
Connector or cable
GA240 - parallel
Shaft
Flange
ø10 mm
Clamping flange
GA241 - parallel
Shaft
Flange
ø6 mm
Synchro flange
1
www.baumerivo.com