GA210 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - parallel

Absolute encoders - parallel
Shaft with clamping or synchro flange
Singleturn encoder 10 bit, gray or binary
GA210, GA211 - Parallel
Features
–– Encoder singleturn / parallel
–– Optical sensing
–– Resolution: 10 bit
–– Clamping flange or synchro flange
–– Low-cost encoder
–– Short-circuit proof push-pull outputs
–– Output release by enable signal
–– Extreme compact design
–– Reset input
GA210 with clamping flange
Technical data - electrical ratings
Voltage supply
10...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤60 mA (24 VDC)
Initializing time (typ.)
20 ms after power on
Interface
10 parallel outputs
Steps per turn
1024 / 10 bit
Absolute accuracy
±0.1°
Sensing method
Optical
Code
Gray or binary
Code sequence
CW/CCW coded by connection
Inputs
Control signals UP/DOWN and
zero
STORE
ENABLE
Output circuit
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Approval
UL approval / E63076
Technical data - mechanical design
Housing
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
IP 54 without shaft seal
IP 65 with shaft seal
≤10000 rpm (mechanical)
≤6000 rpm (electric)
≤0.015 Nm IP 54
≤0.03 Nm IP 65
14.5 gcm²
≤20 N axial
≤40 N radial
Housing: aluminium
Flange: aluminium
-25...+85 °C
-40...+85 °C (optional)
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
250 g
Connector or cable
GA210 - Parallel
Shaft
Flange
ø10 mm
Clamping flange
GA211 - Parallel
Shaft
Flange
ø6 mm
Synchro flange
1
www.baumerivo.com