FD270 Datasheet, PDF (1/2 Pages) Baumer IVO GmbH & Co. KG – Totalizers electromechanic

Totalizers electromechanic
Impulse counters adding, imprint on card
Display 5- or 6-digits, manual reset by lever
FD270
Features
–– Large pulse counter
–– Adding
–– Display 5- or 6-digits
–– Imprint of the measured result on card, paper stripes
or labels
–– Manual imprint, reset and ink ribbon transport by
reset lever
FD270 - Impulse counter
Technical data - electrical ratings
Voltage supply
Ripple residue
Nominal frequency
Current consumption
Power consumption
Pulse ratio
Approval
115 VAC ±10 % (60 Hz)
230 VAC ±10 % (50 Hz)
24 VDC ±10 %
<48 %
50 / 60 Hz
≤600 mA
14 W, 20 VA
1:1
CE conform
Technical data - mechanical design
Display
Number of digits
Digit height
Count mode
Step-by-step switching
Measuring range
Reset
Imprint
Card thickness
Card width
Ink ribbon transport
Operating temperature
Storing temperature
Relative humidity
Protection DIN EN 60529
Housing type
E-connection
Mounting
Dimensions W x H x L
Weight approx.
Material
White numbers on black
5-digits
6-digits
7 mm (numeral readout)
3 mm (printed numerals)
1 impulse = 1 count
Adding in whole steps
99 999 and 999 999
Manual by reset lever
With lever, without reset
By lever upon reset
≤0.3 mm
85...0 mm
Manual by knurled knob
0...+60 °C
-20...+70 °C
80 % non-condensing
IP 41
Housing with ground plate
Cable gland PG 9
Surface mount housing
237 x 152 x 113.5 mm
3500 g
Aluminium die cast alloy
1
www.baumerivo.com