BG650 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – EC-motor with planetary gear unit for automatic spindle positioning cycles

Motors
EC-motor with planetary gear unit
for automatic spindle positioning cycles
BG650
Features
–– Brushless DC-motor
–– With integrated rotation speed electronics
–– Nominal power 65 W, 100 W or 140 W
–– Direct connection to spindle position display
BG650
Technical data - electrical ratings
Voltage supply
Ripple residue
Nominal current
Nominal rating
Undervoltage interruption
External backup
Excess temperature
protection
Peak current
Control signals
Outputs
Inputs
24 (20...30) VDC
<5 %
4 A, 5.6 A, 7.8 A
65 W, 100 W, 140 W
≤19 V
8 AT (required)
110 °C at final power output
circuit
≤27 A
Rotation speed 1
Rotation speed 2
Counterclockwise
Clockwise
Enable
Motor malfunction (Error)
Enable
Start counterclockwise
Start clockwise
Clamp
Technical data - mechanical design
Operating temperature
Protection DIN EN 60529
E-connection
Permanent torque
Starting torque
Operating speed
Scaling ratio
Number of stages
Degree of efficiency
Admitted shaft load
Dimensions W x H x L
Weight approx.
Material
-10...+50 °C
IP 54
- Round connector 8-pin,
motor supply
- Round connector 12-pin,
between motor - SPA
DIN45326, Binder series 723
≤8 Nm (with 65 W)
≤12 Nm (with 100 W)
≤16 Nm (with 140 W)
≤40 Nm (with 65 W)
≤60 Nm (with 100 W)
≤130 Nm (with 140 W)
≤72 rpm (highspeed)
≤4 rpm (slowspeed)
50:1
2
0.81
≤500 N axial
≤350 N radial
See dimensional drawing
1670 g, 2020 g, 2520 g
Aluminium profile, anodized in
black
1
www.baumerivo.com