English
Language : 

40B10Y5 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Solid shaft 11 mm with EURO flange
Incremental encoders
Solid shaft ø11 mm with EURO flange
200…2048 pulses per revolution
ITD 40 B10 Y 5
ITD 40 B10 Y 5 with EURO flange
Technical data - electrical ratings
Voltage supply
5 VDC ±5 %
8...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤100 mA
Pulses per revolution
200...2048
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤120 kHz
Output signals
A, B, N + inverted
Output stage
TTL linedriver (short-circuit
proof)
HTL push-pull (short-circuit
proof)
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-3
Features
–– Encoder with solid shaft ø11 mm
–– Max. 2048 pulses per revolution
–– Optical sensing
–– Centering alignment ø85 mm, mounting screw hole
circle ø100 mm
–– Industrial standard with centering flange
–– TTL or HTL output signals
–– Terminal box axial, screw connection radial
Optional
–– Extended operating temperature range
Technical data - mechanical design
Size (flange)
Shaft type
Shaft loading
Flange
Protection DIN EN 60529
Operating speed
Starting torque
Materials
Operating temperature
Relative humidity
Resistance
Connection
Weight approx.
ø82 mm
ø11 mm solid shaft
≤60 N axial
≤100 N radial
EURO flange B10
IP 65
≤8000 rpm
≤0.015 Nm (+20 °C)
Housing: aluminium
Shaft: stainless steel
-20...+70 °C
-20...+100 °C
90 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 55-2000 Hz
DIN EN 60068-2-27
Shock 100 g, 11 ms
Terminal box, 12-pin, M16x1.5
connection, radial
1150 g
1
www.baumer.com/motion