40B10Y18 Datasheet, PDF (1/4 Pages) Baumer IVO GmbH & Co. KG – Blind hollow shaft 10 mm with EURO flange

Incremental encoders
Blind hollow shaft ø10 mm with EURO flange
200…2048 pulses per revolution
ITD 40 B10 Y18
Features
–– Encoder with blind hollow shaft ø10 mm
–– Max. 2048 pulses per revolution
–– Solid shaft fastening by coupling
–– Centering alignment ø100 mm, mounting screw hole
circle ø115 mm
–– Industrial standard with centering flange
–– TTL or HTL output signals
–– Flange socket axial
ITD 40 B10 Y18 with EURO flange
Technical data - electrical ratings
Voltage supply
5 VDC ±5 %
8...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤100 mA
Pulses per revolution
200...2048
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤120 kHz
Output signals
A, B, N + inverted
Output stage
TTL linedriver (short-circuit
proof)
HTL push-pull (short-circuit
proof)
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-3
Technical data - mechanical design
Size (flange)
Shaft type
Shaft loading
Flange
Protection DIN EN 60529
Operating speed
Starting torque
Materials
Operating temperature
Relative humidity
Resistance
Connection
Weight approx.
ø97 mm
ø10 mm (blind hollow shaft)
≤50 N axial
≤80 N radial
EURO flange B10
IP 66
≤3000 rpm
≤0.07 Nm (+20 °C)
Housing: aluminium, black,
anodised
Shaft: stainless steel
-20...+70 °C
90 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 55-2000 Hz
DIN EN 60068-2-27
Shock 100 g, 11 ms
Connector M23 type 2, 12-pin
1200 g
1
www.baumer.com/motion