S101031SS03Q Datasheet, PDF (5/5 Pages) ITT Industries – Slide Switches

NONE NO MARKINGS
TOP PLATE MARKINGS
D ON-OFF
L ON
M ON-OFF
C&K S Series
Slide Switches
N RED RECTANGLE ON ONE END
NOTE: Top plate markings are available with ‘S2’ mounting style only. The marking color
on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking
color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard.
Other marking colors are available, consult Customer Service Center.
CONTACT MATERIAL
Note: Orientation of
actuator markings
and terminals.
J
OPTION
CODE
RoHS
RoHS
COMPLIANT COMPLIANT
CONTACT
MATERIAL
Q
YES
B
YES
G
YES
YES
SILVER ²
YES
GOLD ¹
YES
GOLD OVER
SILVER ³
POWER
LOW LEVEL/DRY CIRCUIT
LOW LEVEL/DRY
CIRCUIT OR POWER
RATINGS
S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @
250 V AC (UL/CSA).
0.4 VA MAX. @20 V AC OR DC max.
S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 _{CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.}
2 _{CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).}
3 _{CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.}
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options when ordered with ‘G’ or ‘Q’ contact material.
NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
SEAL
NONE NO SEAL
E EPOXY SEAL
EPOXY
AVAILABLE HARDWARE
.075 MAX.
(1,91)
Cap, C2; C3 actuators
Cap, 03 actuator
PART NO.
121160100
121160200
121160300
WHITE
BLACK
RED
Material: 6/6 Nylon
Finish: Matte
PART NO.
121000101
121000102
121000103
WHITE
BLACK
RED
Material: 6/6 Nylon
Finish: Gloss
NOTE: Other cap colors available, consult Customer Service Center.
J–31
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com