E112SD1ABE Datasheet, PDF (5/6 Pages) ITT Industries – Sealed Momentary Pushbutton Switches

C&K E010 Series
Sealed Momentary Pushbutton Switches
A
CONTACT MATERIAL
OPTION
CODE
B
K
P
Q
G
RoHS
RoHS
COMPLIANT * COMPATIBLE *
YES
YES
NO
YES
YES
YES
YES
YES
YES
YES
CONTACT
MATERIAL
GOLD ¹
SILVER ^4,5
GOLD OVER SILVER ^2,3
TERMINAL
PLATING
GOLD ¹
TIN-LEAD ⁶
MATTE-TIN ⁷
SILVER ⁵
GOLD ³
RATINGS
LOW LEVEL/DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
POWER
LOW LEVEL/DRY CIRCUIT OR POWER
4 AMPS @ 125 V AC 0R 28 V DC.
0.4 VA MAX. @ 20 V AC OR DC MAX. OR
4 AMPS @ 125 V AC 0R 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 _{CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.}
2 _{END CONTACTS: Coin silver, with gold plate over nickel plate.}
3 _{CENTER CONTACTS & ALL TERMINALS: Coin silver, with gold plate}
over nickel plate.
4 _{END CONTACTS: Coin silver, silver plated.}
5 _{CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.}
6 _{TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.}
7 _{TERMINALS: Copper alloy, with matte-tin over nickel plate.}
NOTE: Any models supplied with P, Q, B or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options when ordered with G or Q contact material.
B contact material standard with all terminations except C, Z.
B contact material must be ordered with R2 terminations.
Q contact material standard with C, Z terminations.
K, P contact materials not available with Z terminations.
E EPOXY SEAL
SEAL
AVAILABLE HARDWARE
Cap
Cap
Cap
.120
(3,05)
.200 DIA.
(5,08 )
.155
(3,94)
PART NO.
708901000
708902000
708903000
WHITE
BLACK
RED
Material: Nylon
Finish: Gloss
PART NO.
752701000
752702000
752703000
WHITE
BLACK
RED
Material: Nylon
Finish: Gloss
PART NO.
801801000
801802000
801803000
WHITE
BLACK
RED
Material: Nylon
Finish: Gloss
NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”.
Other cap colors available, consult Customer Service Center.
A–48
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com