E010 Datasheet, PDF (5/6 Pages) ITT Industries – Sealed Momentary Pushbutton Switches

C&K E010 Series
Sealed Momentary Pushbutton Switches
CONTACT MATERIAL
OPTION
A
CODE
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
B (STD.)
K
GOLD ¹
GOLD ¹
TIN-LEAD ⁶
LOW LEVEL/DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX.
Q (STD.)
SILVER ^4,5
SILVER ⁵
POWER
4 AMPS @ 125 V AC OR 28 V DC.
G
GOLD OVER SILVER ^2,3
GOLD ³
LOW LEVEL/DRY CIRCUIT OR POWER
0.4 VA MAX @ 20 V AC OR DC MAX. OR
4 AMPS @ 125 V AC OR 28 V DC.
CONTACT MATERIAL/APPLICATION RECOMMENDATIONS–SEE SECTION N.
1 _{CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.}
2 _{END CONTACTS: Coin silver, with gold plate over nickel plate.}
3 _{CENTER CONTACTS & ALL TERMINALS: Coin silver, with gold plate}
over nickel plate.
4 _{END CONTACTS: Coin silver, silver plated.}
5 _{CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.}
6 _{TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.}
All models
with all options when ordered with G or Q contact material.
B contact material standard with all terminations except C, Z.
B contact material must be ordered with R2 terminations.
Q contact material standard with C, Z terminations.
K contact materials not available with Z terminations.
E (STD.) EPOXY SEAL
SEAL
AVAILABLE HARDWARE
Cap
Cap
Cap
.120
(3,05)
.200 DIA.
(5,08 )
.155
(3,94)
.375 DIA.
(9,53 )
.120
(3,05)
.250
(6,35)
.138
(3,51)
.310 DIA.
(7,87 )
.250
(6,35)
PART NO.
708901000
708902000
708903000
WHITE
BLACK
RED
Material: Nylon
Finish: Gloss
PART NO.
752701000
752702000
752703000
WHITE
BLACK
RED
Material: Nylon
Finish: Gloss
PART NO.
801801000
801802000
801803000
WHITE
BLACK
RED
Material: Nylon
Finish: Gloss
NOTE: Additional nuts, locking rings and lockwashers available separately, see section N.
Other cap colors available, consult Customer Service Center.
A-44
Third Angle
Projection
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com