MA00L1NZQD Datasheet, PDF (4/6 Pages) ITT Industries – Half-inch Rotary Switches

C&K M Series
Half-inch Rotary Switches
SHORTING/NON-SHORTING CONTACTS
N NON-SHORTING CONTACTS
Break-before-make
TERMINATIONS
Z SOLDER LUG
C PC THRU-HOLE
SP
DP
SP
DP
PANEL MOUNTING
WITH FLATS
0.213
(5.41)
WITHOUT FLATS
0.260 DIA
(6.59)
PC MOUNTING
36^º INDEXING
SP
DP
0.260 DIA
(6.60)
Hardware: All models, one mounting nut and lockwasher
supplied standard. MA00 thru MD00 models: two stop pins
and adhesive mylar washer supplied. ME00 thru MH00
models: two stop rings supplied. Hardware is available
separately, see section “Technical Data and Additional
Hardware”.
PC MOUNTING
L
30^º INDEXING
SP
DP
NOTE: Q contact material standard. Terminal numbers marked on side of housing.
All terminals insert molded. All terminals present regardless of number of switch positions.
CONTACT MATERIAL
Actuators and schematics shown in pos. 1.
OPTION
CODE
RoHS
RoHS
COMPLIANT* COMPATIBLE*
CONTACT
MATERIAL
TERMINAL
PLATING
Q
YES
YES
SILVER ^{1, 2}
SILVER ²
POWER
G
YES
YES
GOLD OVER
SILVER ^{3, 4}
GOLD ⁴
LOW LEVEL/DRY CIRCUIT
OR POWER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
RATING
CARRY: 6 AMPS CONTINUOUS. SWITCH: 250 mA @ 125 V AC
or 28 V DC.
0.4 VA MAX. @ 20 V AC or DC MAX. or, CARRY: 6 AMPS
CONTINUOUS. SWITCH: 250 mA @ 125 V AC or 28 V DC.
1 _{MOVABLE CONTACTS: Non-shorting: Copper alloy, silver plated.}
Shorting: Zinc alloy, silver plated.
2 _{STATIONARY CONTACTS & ALL TERMINALS: Copper alloy, silver plated.}
3 _{MOVABLE CONTACTS: Non-shorting: Copper alloy, with gold plate over nickel plate, over silver plate.}
Shorting: Zinc alloy, with gold plate
4 _{STATIONARY CONTACTS & ALL TERMINALS: Copper alloy, with gold plate}
over nickel plate over silver plate.
NOTE: Any models supplied with Q G contact material are RoHS
compliant. For the latest information regarding RoHS compliance,
please go to: www.ittcannon.com/rohs.
All models
when ordered with S1-S6 stainless steel actuator options.
L–15
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com