9201J1ZQE2 Datasheet, PDF (4/5 Pages) ITT Industries – Power Rocker and Lever Handle Switches

C&K 9000 Series
Power Rocker and Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE
Terminal Nos. Molded
On Side of Case
9201J1AV2QE2
Vertical Actuation
DPDT
9201 Only
NOTE: Terminal bend radii and lead-in manufacturing option.
Terminal spacing greater than 3mm at all points.
CONTACT MATERIAL
OPTION
CODE
Q
RoHS
RoHS
COMPLIANT * COMPATIBLE *
YES
YES
MODEL
9201
9221
CONTACT
MATERIAL
SILVER ^1,2
SILVER CADMIUM OXIDE ^3,4,0
TERMINAL
PLATING
SILVER OR TIN ^2,5
TIN ⁵
POWER
RATINGS
6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 _{END CONTACTS: Coin silver, silver plated.}
2 _{CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.}
3 _{END CONTACTS: Silver cadmium oxide.}
4 _{CENTER CONTACTS: Copper alloy, silver plated.}
5 _{Z4 TERMINALS ONLY: Copper alloy, tin plated.}
6 _{Cadmium used for electrical contacts is acceptable for RoHS.}
NOTE: Any models supplied with Q contact material is RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
9221 model must be ordered with Z4 terminations and D seal option.
All 9000 Series models meet international dimensional and electrical requirements.
E EPOXY SEAL
SEAL
D NO EPOXY SEAL
Not available with 9221 model or Z4 terminations.
Must be ordered with 9221 model and Z4 termination.
H–56
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com