301100000 Datasheet, PDF (4/8 Pages) ITT Industries – Thumbwheel Switches

MOUNTING STYLE
Type 1 Rear Mount
MOUNTING
STYLE
DIM. ‘A’
DIM. ‘B’
10
(.350 x N) + .340 (.350 x N) + .560
(8,89 x N) + (8,64) (8,89 x N) + (14,22)
10
N = Number of sections.
Recommended panel thickness:
0.46-.125
(1,16-3,18)
SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
C&K 3 Series
Thumbwheel Switches
PANEL MOUNTING
Mtg. Holes
19
SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS
(Must be ordered with number of sections option “0”, see Page N–9.)
Type 2 Rear Mount
20 SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
N = Number of sections.
29
SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS
(Must be ordered with number of sections option “0”, see Page N–9.)
N = Number of sections.
N
NOTE: Endplates, blank sections, spacers and
assembly hardware available separately, see pages N–13 and N–14.
N–11
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com