English
Language : 

031-1007-042 Datasheet, PDF (33/55 Pages) Dialight Corporation – High Reliability, Military D Subminature, & Non-Magnetic/No-Outgas
Grommet D
GD*
Environmental Protection
MIL-C-24308 Compatibility
Reliability and Versatility
GD* connectors are ideal for aerospace, military,
telecommunications and other applications requir-
ing environmental protection and high reliability.
ITT Cannon developed GD* connectors to meet the
needs of the avionics industry. These connectors
provide high-density and moisture protection.
Environemental protection is accomplished by the
resilient grommet, interfacial seal, and bonded
connector components.
Performance and Material Specifications
MATERIALS AND FINISHES
Materials
Shell
Low carbon steel per ASTM-A-620
Insulator
Contacts
Diallyl phthalate per MIL-M-14
type SDF-F or GDI-30F
Copper alloy
Float Mount Hardware
Grommets and Seals
Bonding Materials
Stainless steel
Silicone elastomer or Fluorosilicone
Epoxy
Finishes
Yellow chromate over cadmium per QQ-P-416,
Type II, Class 2
-
Standard finish: Gold over nickel
Military Finish: Gold 50 microinches thickness
per MIL-G-45204, Type II, Grade C, Class 1,
over copper per MIL-C-14550
Passivated per QQ-P-35
-
MECHANICAL FEATURES
Wire Accommondation - Contact: #20, #22, #24 AWG.
Wire O.D. .071 (1.80) maximum, .038 (0.97) minimum.
Contact Retention - 9 lbs. minimum (40n) after 10 insertions.
ELECTRICAL DATA
Test Voltage AC RMS 60 Hz
Average Flashover
Test
Sea Level
1,000
1,000
20,000 Ft.
1,000
650
Maximum Current Carrying Capacity of Contacts - #20 Contacts: 5 Amps
Temperature Range - -65˚C to +150˚C (-53.9˚F to +302˚F)
50,000 Ft.
500
325
70,000 Ft.
500
325
How to Order
SERIES PREFIX
GD - Grommet D
SHELL SIZE
E, A, B, D
SERIES PREFIX
SHELL SIZE
MOUNTING TYPE
CONTACT ARRANGEMENT
CONTACT TYPE
MODIFICATION
MOUNTING TYPE
No Designator - .120 (3.05) Diameter Mounting
Holes
Y - Float Mount for Rear and Front Panel
Mounting
CONTACT ARRANGEMENT
9, 15, 25, and 50
GD B - 25 P * *
CONTACT TYPE
P - Pin, crimp termination
S - Socket, crimp termination
PB - Pin, Printed circuit termination with no-
removable straight tails for .125 (3.18)
maximum P.C. Board thickness
MODIFICATIONS (Typical Modifiers)
F0 - Connectors supplied Less Contacts
A156 - Connectors supplied with contacts plat-
ed per MIL-G-45204 Type II Class 1
over coper per MIL-C-14550 (M24308
Finish)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
364