LP22C21T203Q Datasheet, PDF (3/3 Pages) ITT Industries – Miniature Snap-in Slide Switches

C&K LP Series
Miniature Snap-in Slide Switches
TERMINATIONS
03 SOLDER LUG WITH HOLE
J
NONE NO MARKINGS
HOUSING MARKINGS
D ON-OFF
NOTE: Housing markings are available with ‘T2’ mounting style only. The marking color
on all housings with marking options ‘D’ is white, standard. Other marking colors are
available, consult Customer Service Center.
Orientation of actuator
and terminals.
CONTACT MATERIAL
OPTION
CODE
RoHS
RoHS
COMPLIANT COMPLIANT
Q
YES
YES
CONTACT
MATERIAL
SILVER ²
POWER
RATINGS
LP0X, LP2X MODELS: 6 AMPS @ 125 V AC or 28 V DC;
3 AMPS @ 250 V AC (UL/CSA).
LP7X, LP8X MODELS: 11 AMPS @ 125/250 V AC (UL/CSA).
B
YES
YES
GOLD ¹
LOW LEVEL/DRY
CIRCUIT
0.4 VA MAX. @20 V AC OR DC MAX.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 _{CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.}
2 _{CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).}
3 _{CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.}
NOTE: Any models supplied with Q or B contact material are RoHS com-
pliant. For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
All models
with all when ordered with ‘Q’ contact material.
J–26
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com