031-8717-021 Datasheet, PDF (29/96 Pages) ITT Industries – Cannon Trident Series

Cannon Trident Connectors
Ringlock Circular Connectors
Standard Plug
for Pin Contacts
• Mates with Standard Receptacles, see page 30.
• Accepts pin contacts, see page 64.
• Discriminating (Keying) Pins available, see page 73.
• Can be water sealed to IP65.
Shell Number of ^{Single Piece Connector}
Dimensions
Size Contacts Part Number Nomenclature ØA ± 0,20 (.008) B max. ØC ± 0,15 (.005) ØD ± 0,15 (.005)
E
10
4
192922-1250 TR1004PMS1NB 21,60 (.850) 31,80 (1.252) 10,90 (.429) 12,20 (.480) 19,10 ±0,20 (.751 ±.007)
12
8
192922-1260 TR1208PMS1NB 24,80 (.976) 31,80 (1.252) 13,80 (.543) 15,10 (.594) 19,10 ±0,20 (.751 ±.007)
14
12
192922-1270 TR1412PMS1NB 28,00 (1.102) 31,80 (1.252) 17,00 (.669) 18,30 (.720) 19,10 ±0,20 (.751 ±.007)
16
19
192922-1280 TR1619PMS1NB 31,20 (1.228) 31,80 (1.252) 19,90 (.783) 21,40 (.842) 19,10 ±0,20 (.751 ±.007)
18
7
192990-1330 TR1807PMS1NB 34,30 (1.350) 33,00 (1.299) 22,50 (.885) 24,00 (.944) 19,10 ±0,20 (.751 ±.007)
18
23
192990-1320 TR1823PMS1NB 34,30 (1.350) 31,80 (1.252) 22,40 (.881) 24,00 (.944) 19,10 ±0,20 (.751 ±.007)
20
28
192922-1290 TR2028PMS1NB 37,50 (1.476) 31,80 (1.252) 25,60 (1.007) 27,10 (1.066) 19,10 ±0,20 (.751 ±.007)
22
35
192922-1300 TR2235PMS1NB 40,70 (1.602) 31,80 (1.252) 28,50 (1.122) 30,40 (1.196) 19,10 ±0,20 (.751 ±.007)
24
48
192990-1340 TR2448PMS1NB 43,90 (1.728) 31,80 (1.252) 31,70 (1.248) 33,50 (1.318) 14,72 ±0,15 (.580 ±.006)
Note: For versions with plastic locking ring, please consult the factory.
Accessory
Thread
9/16 - 24 UNEF
11/16 - 24 UNEF
13/16 - 20 UNEF
15/16 - 20 UNEF
11/16 - 18 UNEF
11/16 - 18 UNEF
13/16 - 20 UNEF
15/16 - 18 UNEF
17/16 - 18 UNEF
IMPORTANT NOTE: Standard and Reversed Format
Equipment design dictates whether the fixed connector is “live” or “dead” when
disconnected. Connector housings are available that
provide socket contacts on the live side of the equipment.
Standard Format: Receptacle with socket contacts.
Reversed Format: Receptacle with pin contacts.
Standard and Reversed connectors are not intermateable.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
29